TRUSS QUADRO 25 Square section structure features a 25 cm long side and cast aluminium end-plate. These features gives the structure greatly increased sturdiness, with a relevant increase of the antitorsion parameters
The square section truss with 25 cm long side features two kinds of connection: by means of spigots, pins and split pins for quick connection, code PLQSET02PLUS, and by means of nuts and bolts, code PLQSET01. The structure is made of extruded aluminium 6005 T6 featuring transverse sections with a 50 mm diameter and a 1,5 mm thickness. Diagonal braces are a continuous line and are made of extruded aluminium 6060 T6 with a 14 mm diameter and a 1,5 mm thickness. The end-plates are made of cast aluminium SG AlSi 12. The solution of the uninterrupted fret pattern gives the structure a good aesthetic impact: as such it can also be used in small areas.